A low-power 2nd-order CT delta-sigma modulator with a single operational amplifier

We present a 2nd-order 4-bit continuous-time (CT) delta-sigma modulator (DSM) employing a 2nd-order loop filter with a single operational amplifier. This choice strongly reduces the power consumption, since operational amplifiers are the most power hungry blocks in the DSM. The DSM has been implemented in a 65 nm CMOS process, where it occupies an area of \(0.08\,\hbox {mm}^2\) . It achieves an SNDR of 64 dB over a 500 kHz signal bandwidth with an oversampling ratio of 16. The power consumption is \(76\,\upmu \hbox {W}\) from a 800 mV power supply. The DSM figure-of-merit is 59 fJ/conversion. The CT DSM is well suited for the receiver of an ultra-low-power radio.     

Design and characterization of a chitosan physical gel promoting wound healing in mice

In this study, a sterile and biocompatible chitosan (CHI) gel for wound healing applications was formulated. CHI powder was treated in autoclave (ttCHI) to prepare sterile formulations. The heat treatment modified the CHI molecular weight, as evidenced by GPC analysis, and its physical–chemical features. Differential scanning calorimetry studies indicated that the macromolecules, before and after thermal treatment, differ in the strength of water-polymer interaction leading to different viscoelastic and flow properties. Thermally treated CHI exhibited the following effects: (i) increased the proliferation and migration of human foreskin foetal fibroblasts at 24 h; (ii) accelerated wound healing (measured as area of lesion) at 3 and 10 days in an in vivo model of pressure ulcers. These effects were linked to the increase of the hydroxyproline and haemoglobin content as well as Wnt protein expression. Moreover, we found a reduction of myeloperoxidase activity and TNF-α mRNA expression. These observations suggest the potential of this novel CHI gel in wound healing and other therapeutic applications.     

Data driven analysis of functional brain networks in fMRI for schizophrenia investigation

The purpose of this article is to present a methodology to identify the sources of activity in brain networks from functional magnetic resonance imaging (fMRI) data using the multiset canonical correlation analysis algorithm. The aim is to lay the foundations for a screening marker to be used as indicator of mental diseases. Group analysis blind source separation methods have proved reliable to extract the latent sources underlying the brain activities but currently there is no recognized biomarker for mental disorders. Recent studies have identified alterations in the so called default mode network (DMN) that are common to several neuropsychiatric disorders, including schizophrenia. In particular, here we account for the hypothesis that the alterations in the DMN activity can be effectively highlighted by analyzing the transient states between two different tasks. A set of fMRI data acquired from 18 subjects performing working memory tasks is investigated for such purpose. Subjects are patients affected by schizophrenia for one half and healthy control subjects for the other. Under these conditions, the proposed methodology provides high discrimination performances in terms of classification error, thereby providing promising results for a preliminary tool able to monitor the disease state or to perform a prescreening for patients at risk for schizophrenia. © 2014 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 24, 239–248, 2014     

High Performance, Low-Dose Radiography Systems for Space and Remote Site Applications

Medical imaging applications using X- and gamma-rays have reached outstanding levels of complexity and performance, thanks to technology achievements in the fields of radiography, tomography and high resolution synchrotron devices. The operability of the related instrumentation resides in the availability of highly qualified specialists, as well as of medical doctors for diagnoses and treatment. This is a problem for personnel working in difficult ambient conditions as can be found in remote sites like Arctica, Antarctica and under-populated, desolated or mountainous regions on Earth. Astronauts, during long permanence at the Space Station or on future mission to Mars are potentially subject to risks such as traumas, fractures or diseases which would require semi-automated, easy-to-handle application of X-ray radiographic devices. For this purpose, the possible use of imaging instrumentation based on solid state detectors is discussed with special regard to CdZnTe pixel devices, now available with sub-mm resolution. The use of these semiconductor detectors will also allow to perform image diagnostics at much lower doses compared to the current plate-based radiographic techniques.     

Carboxymethyl derivative of scleroglucan: a novel thermosensitive hydrogel forming polysaccharide for drug delivery applications

A carboxymethyl derivative of scleroglucan (Scl-CM) with a derivatization degree of 65 ± 5% was synthesized. The rheological behaviour of this novel polymer was studied and compared with that of the starting polymer. We observed that the charged moieties carried on the chains could prevent the triple helix formation of Scl. Scl-CM aqueous solutions behave like true polymer solutions up to 1% w/v, whereas above this concentration a weak gel behaviour was observed. CaCl₂ addition to aqueous Scl-CM solutions led to a physical gel formation; the hydrogel strength was related to polymer and CaCl₂ concentrations. Temperature sweeps, registered at 1 Hz on hydrogels differing in CaCl₂ concentration, evidenced a gel → sol transition in the range of 30–40°C, depending on the molar ratio between carboxylic groups and Ca⁺². In order to verify a possible use of these hydrogels as drug delivery systems, acyclovir was loaded into the network. Rheological analysis evidenced that the loaded drug can affect the hydrogel elastic modulus. The release of acyclovir in phosphate buffer was evaluated at different temperatures in order to assess the suitability of this novel drug delivery system in topical applications.     

Nucleation and Crystallization of New Glasses from Fly Ash Originating from Thermal Power Plants

The nucleation and crystallization kinetics of new glasses obtained by melting mixtures of a Spanish carbon fly ash with glass cullet and dolomite slag at 1500°C has been evaluated by a calculation method. These glasses, whose microstructure was examined by TEM carbon replica, were susceptible to controlled crystallization in the 800°–1100°C range. The resulting glass-ceramics developed acicular and branched wollastonite crystals or a network of dendritic pyroxene mixed with anorthite feldspar (SEM and EDX analysis). The time–temperature–transformation curves (processing of the XRD data) showed the crystallization kinetics and the critical cooling rate to be in the 12°–42°C/min range.     

Sol–Gel Processing and Characterization of Pure and Metal-Doped SnO2 Thin Films

A chloride-based inorganic sol–gel route was used for preparing pure and metal (osmium, nickel, palladium, platinum)-doped SnO₂ sol. SnCl₄ was first reacted with propanol, then the resulting compound was hydrolyzed and subsequently mixed with solutions of the metal dopants. The obtained sols were used for depositing thin films by spin coating or for preparing powders by solvent evaporation at 110°C. FTIR spectroscopy and thermal analysis of the powders revealed that chlorine still bound to tin stabilized the sol against gelation by hindering the condensation reactions. Film characterizations showed that platinum and palladium, unlike nickel and osmium, were likely to form nanoparticles in the SnO₂ lattice. This result was discussed with regard to the different ways that platinum and palladium, on one hand, and nickel and osmium, on the other, modified the growth of SnO₂ grains and the film roughness and morphology. Dopants that formed nanoparticles (platinum, palladium) resulted in the roughest film, while dopants that did not form particles (nickel, osmium) resulted in SnO₂ grain size very close to that of pure SnO₂.     

δ-Tocomonoenol: A new vitamin E from kiwi (Actinidia chinensis) fruits

A new vitamin E, δ-tocomonoenol, has been isolated from Actinidia chinensis (kiwi) fruits. The new structure, 2,8-dimethyl-2-(4,8,12-trimethyltridec-11-enyl)chroman-6-ol, has been elucidated on the basis of EIMS, 1D, and 2D NMR spectral data. GC–MS analysis of peels and pulps of kiwi showed that the new compound, together with δ-tocopherol, is mainly present in the fruit peel, whilst α-tocopherol is present in a similar amount in both matrices. The compound was tested for its radical-scavenging and antioxidant capabilities, by measuring its ability to scavenge DPPH (2,2′-diphenyl-1-picrylhydrazyl radical) and anion superoxide radical, and inhibit the formation of methyl linoleate conjugated diene hydroperoxides and TBARS (thiobarbituric acid reactive species).